Profix is dedicated to the installation with metal panels, it is characterized by not needing any fixing accessory, the tabs that the post incorporates fix and hold the fence. It is a post made of galvanized steel sheet. It can be installed embedded or with a base, we offer you 4 different bases: the Profix aluminum base, the Profix eco base, the Profix steel base and for installations on vertical surfaces the Profix steel front base. To assist in the installation fence with the Profix post, Profix polyamide tensioners or blockers are usually used. Finally, there is the possibility of acquiring a replacement post if needed.
Compatible panels
Profix post
- Height
From 700 to 2,700 mm - Section
66×50 mm
Available coatings
How to install an Hércules fence with Profix posts?
The Profix® post is designed to make metal fencing installation easier, thanks to its integrated tabs, which allow the panel to be fixed at various heights quickly, securely, and without the need for fixing accessories . This results in a faster installation and a strong, long-lasting finish.
The installation process is very simple, just follow these steps:
- Mark with a cord where you are going to locate the enclosure, taking into account the center distance.
- Dig the holes for the posts.
- Place the post, level it, and pour the concrete, pressing it to eliminate any air pockets. (For the first post in the line, allow the concrete to set before continuing).
- Fit the panel into the tabs on the post, and then add a temporary blocker at the top and bottom to hold it in place during installation. (These blockers are for temporary use only and must be removed once the installation is complete).
- Continue mounting the posts and panels following the instructions above.
