SLIDING GATES
The sliding gates are made up of a single leaf that slides on a rail previously installed on the floor. To guide and secure it, they have a guide post and a receiving post. Each MRT sliding gate model has a matching railings and swing gates system to complete it. They are manual opening gates and manufactured according to EN 13241, so they have the CE marking that guarantees that MRT sliding gates comply with the safety requirements to give access to people, goods and vehicles in industrial, commercial and residential premises.
There are two sliding gate models depending on the robustness of their structure: Light and Pro. The wide range of gratings is compatible with both models.
Nominal width
From 3,000 to 8,000 mm
Simple closing column
Section 100x100x2.0 mm
Simple guide post
For posts 1.2 to 2 m high
Section 100x100x2.0 mm
Section 100x100x2.0 mm
Double guide post
For posts 2.2 to 2.5 m high
Section 100x100x2.0 mm
Section 100x100x2.0 mm
Frame and Stiffener
For nominal widths of 3 to 6 m: 60x60x1.5 mm
For nominal widths of 7 to 8 m: 60x60x2.0 mm
For nominal widths of 7 to 8 m: 60x60x2.0 mm
lower profile
For nominal widths of 3 to 6 m: 120 x 60 x 2.0 mm
For nominal widths of 7 to 8 m: 120 x 60 x 3.0 mm
For nominal widths of 7 to 8 m: 120 x 60 x 3.0 mm
Nominal width
From 3,000 to 12,000 mm
Double closing column
Section 80x80x2.0 mm
Double guide post
Section 80x80x2.0 mm
Frame and Stiffener
For nominal widths from 3 to 8 m: 60x60x2.0 mm
For nominal widths from 9 to 12 m: 80x60x2.0 mm
For nominal widths from 9 to 12 m: 80x60x2.0 mm
lower profile
Section 200x100x3.0 mm
Posts to embed or with welded base.
Screw-on or flush-mounted rail.
Gate without lock.
Posts with covered openings in order to pass the wiring through.
Defensive crest welded to the top frame, only available for not crossing gates.
Additional guide post depending on the length of the gate.
