CANTILEVER SLIDING GATES
Cantilever sliding gates do not require a foundation to install them, they are suspended on two carriages that allow the movement of the leaf without the need for a rail or guide.
It is a manual opening with the option to purchase it prepared for motorization. It is manufactured according to the EN 13241 standard, therefore, it has the CE marking that guarantees that all MRT cantilever sliding gates meet the safety requirements to give access to people, goods and vehicles in industrial, commercial and residential premises. It is delivered with the corresponding Declaration of Performance.
Light cantilever sliding gates are available with 13 different types of grilles that are presented below. Each model has a matching system of railings and swing doors to complete it.
Gates are made according to EN 13241 standard.
They open manually and you can choose the opening direction.
Its height ranges from 1,200 to 2,500 mm.
Nominal width
From 3,000 to 8,000 mm
Simple closing column
Section 100x100x2.0mm
Simple guide post
Section 100x100x2.0 mm
For posts 1.2 to 2.0 m high
For posts 1.2 to 2.0 m high
Double guide post
Section 100x100x2.0 mm
For posts 2.2 to 2.5 m high
For posts 2.2 to 2.5 m high
Frame and Stiffener
For nominal widths from 3 to 6 m: 60x60x1.5 mm
For nominal widths from 7 to 8 m: 60x60x2.0 mm
For nominal widths from 7 to 8 m: 60x60x2.0 mm
lower profile
For nominal widths from 3 to 6 m: 120 x 60 x 2.0 mm
For nominalwidths from 7 to 8 m: 120 x 60 x 3.0 mm
For nominalwidths from 7 to 8 m: 120 x 60 x 3.0 mm
Posts to embed or with welded base.
Gate without lock.
Posts with covered openings in order to pass the wiring through.
Defensive crest welded to the top frame, only available for not crossing gates.
Additional guide post depending on the length of the gate.
